Chauvin Arnoux CA 5005 [P01196523F] 1000V AC Handheld Analog Multimeter with MN 89 Clamp & Plastic Carry Case

Not yet rated Write a review
Chauvin Arnoux
Rp.18.613.000
Availability:
2 - 4 WEEKS
Product Code:
P01196523F
Brand:
Chauvin Arnoux
Update Terakhir:
10 Mar 2023
This product has a minimum quantity of 2
  • Free delivery

  • Money back guarantee

Share

The Chauvin Arnoux CA5005 analogue multimeter includes a smart feature, the MN 89 DC clamp, which has been included in the design by Chauvin Arnoux to ensure maximum accuracy each time you use it. Because of this clamp, this analogue multimeter has a typical accuracy of 1.5%, as well as an impedance of 20kΩ/V.

The DC voltage measuring range of this multimeter is 100mV to 1000V (8 cal.), and it also has the ability to work with AC voltage as well, within a range of 10V to 1000V (5 cal.). 

Several extra functions have been included in the CA5005 as a way of making your working life a little bit easier. It comes with automatic calibration, as well as a “voltest” light which can be used if the Ohmmeter in the device currently in use. It is also able to conduct an audible continuity test when R is less than 50Ω. This analogue multimeter also has a light fuse and a scale dB for AC voltages only.

For your complete peace of mind when using this product, it comes with an IEC 1010-1 600V CAT III safety rating, as well as its own plastic carrying case for extra protection. And for optimum usage every time, the Chauvin Arnoux CA5005 Multimeter with MN 89 Clamp & Plastic Carry Case is 500g in weight.

  • DC voltage: 100 mV to 600 V (8 ranges)
  • AC voltage: 10 V to 600  V (5 ranges)
  • DC current: 50 µA to 10 A (6 ranges)
  • AC current: 3 A to 240 A (5 ranges) with MN89clamp supplied
  • Automatic calibration
  • “Voltest” LED if voltage present in ohmmeter mode
  • Typical accuracy: 1.5%
  • Impedance: 20 kΩ/V
  • Resistance: 10 kΩ and 1 MΩ
  • Audible continuity test: R < 50 Ω
  • dB scale (AC voltages)
  • Fuse status LED
  • Dimensions: 160 x 105 x 56 mm
  • Weight: 500 g
  • IP53
  • Use on any installation rated lower than or equal to CAT III 600 V as per IEC/EN 61010-1 Edition 2

  • DC voltage: 8 ranges: 100 mV /../ 1,000 V (6)
  • AC voltage: 5 ranges: 10 V /../ 1,000 V (6)
  • Internal resistance: 20 kΩ/V
  • Working frequency: 10 Hz ...100 kHz depending on range
  • DC current: 6 ranges: 50 µA /../ 10 A 
  • AC current: 5 ranges: 3 A /../ 300 A(2)
  • Resistance:-
  • Audible continuity test: -
  • Scale in dB for V AC: -
  • Typical accuracy (3): 1.5 % on V • 2.5 % on V~ and A • 10 % on Ω
  • Power supply: 1.5 V battery
  • Battery life: 10,000 measurements of 10 s
  • Electrical safety (4): IEC / EN 61010-1 Edition 2 • 600 V Cat III-2
  • Protection (5): HRC fuses: 1 A and 10 A
  • Degree of watertightness: IP 40
  • Environmental conditions:  -10 °C ... +55 °C and RH < 90 %
  • Dimensions / Weight: 160 x 105 x 56 mm / 500 g
  • (1) Additional “VoltestTM” function to check the possible presence of voltage on resistance and audible continuity test - (2) Limited to 240 A max by the miniclamp MN 89
  • (3) In % of end of scale - (4) Degree of pollution 2 - (5) Electronic protection and HBC fuses for the current ranges with fuse test light - (6) For use up to 600 V max

  • (1) Chauvin Arnoux CA5005 Analogue Multimeter
  • (1) Test Leads + Probes
  • (1) Battery
  • (1) MN 89 Clamp
  • (1) Plastic Carry Case
  • (1) User Manual
  • Optional Accessories:
  • P01298033: Shoulder Bag (240 x 230 x 70mm)
  • P01298036: Carrying Holster (220 x 180 x 75mm)
  • P01298037: Carrying Case with Precut Foam Insert (270 x 200 x 65mm)

Download

Note: Prices are not binding at any time subject to change without prior notice